How to Pair a Premium Metal Wireless Keypad to the Receiver
Overview
In this
article you will learn how to pair a premium wireless keypad to the
radio receiver. The radio receiver is located inside the opener's
cabinet. The keypad must already have an access code added in, refer to
this article if you haven't already added an access code: How to Add an Access Code to a Premium Wireless Keypad.
The code will be entered on the keypad at the same time as a button on
the radio receiver is pressed. This requires dismounting the keypad or
having a second person to enter the code into the keypad where it's
mounted. An example of this process will be provided at the end of the
article.
What You Need
- Included key to remove the keypad from housing
- A second person can be used in place of removing the keypad
- A long and narrow tool of some sort (paperclip, tooth pick, etc..)
Procedure
Enter the Access Code and Hold Down the Last Digit
The keypad will rapidly beep once the last digit is pressed. Continue holding the last digit and proceed to the next step.
Press and Hold P1 or P2 on the Radio Receiver Using the Narrow Tool
Use P1 if the desired behavior is to open and/or close the gate.
Use P2 if the desired behavior is to latch the gate open.
Make
sure the last digit of the code is being held while doing this step.
Once the green LED on the receiver turns on, the receiver should 'click'
and the gate should operate, indicating a successful pair. Let go of
both buttons at this time. Enter the access code on the keypad to
confirm it makes the gate operate.
Example
The code used in this example is "1234#".
After
each key press you must move quickly to the next. If you wait too long
before the next key press, the keypad will exit programming mode and you
will need to start over. We recommend writing down the example below
using your own values before beginning the process. This will help you
do the process quickly, ensuring the keypad doesn't time out and exit
programming.
- Enter the access code and hold down the last digit
- 1234, hold down #
- Keypad will rapidly beep
- While # is being held (last digit), press and hold P1 on the radio receiver
- Hold down P1
- The gate should operate
- Let go of both buttons
- The keypad is now paired to the gate. Type the code in to confirm it makes the gate operate.
Related Articles
How to Add an Access Code to a Premium Metal Wireless Keypad
Overview In this article you will learn how to add an access code to a premium metal wireless keypad. An access code is used to operate the gate. The premium metal wireless keypad is capable of holding up to 256 different access codes. An access code ...How to Hold the Gate Open Using a Premium Metal Wireless Keypad
Overview The latch open feature should ONLY be used with systems utilizing the automatic close timer to close the gate. In this article you will learn how to hold the gate open using an access code on a Premium Metal Wireless Keypad. This process ...How to Unpair a Premium Metal Wireless Keypad from the Receiver
Overview In this article you will learn how to unpair a premium wireless keypad from the radio receiver. The radio receiver is located inside the opener's cabinet. The code will be entered on the keypad at the same time as a button on the radio ...How to Pair a Basic Wireless Keypad to the Receiver
Overview In this article you will learn how to pair a basic wireless keypad to the radio receiver. The radio receiver is located inside the opener's cabinet. The keypad's code will be entered on the keypad at the same time as a button on the radio ...How to Turn the Night Light On or Off on a Premium Metal Wireless Keypad
Overview In this article you will learn how the premium metal wireless keypad's night light works and how to enable/disable the feature. The night light will illuminate once it is dark eanough and turn back off once it is light enough. The light ...