How to Enable Latch Mode on the Low Current Receiver

How to Enable Latch Mode on the Low Current Receiver

Overview

The "hold" open or latch mode feature should ONLY be used with systems utilizing the automatic close timer to close the gate.
In this article you will learn how to enable the "hold open" or latch mode feature on the low current receiver. P2, or relay 2, on the radio receiver can be configured to hold the gate open. Once this procedure is complete, any keypad or remote that is paired to P2 will lock the gate open.

What You Need

  1. A long and narrow tool of some sort (paperclip, tooth pick, etc..)

Procedure

Verify if Latch Mode is Already Enabled

Press the P2 push-button until the green LED light comes on, then release. The green LED light should be steady solid.
A flashing green LED indicates latch mode is already enabled on the receiver and continuing with this procedure is not necessary.

Enable Latch Mode

  1. Using the narrow tool, press and hold P2 until the green LED turns on.
  2. As soon as the LED turns on, release P2 and immediately press and release P1.
  3. The green LED should begin flashing. Latch mode is now enabled.

Verifying Latch Mode After Enabled

  1. Press and hold P2 until the green LED light turns on.
  2. The green LED light should be flashing. If the green LED light is steady, redo the Enable Latch Mode
    section above.

Disable Latch Mode (Return P2 Back to Momentary Mode)

  1. Refer to this article. How to Disable Latch Mode on the Low Current Receiver

    • Related Articles

    • How to Disable Latch Mode on the Low Current Receiver

      Overview In this article you will learn how to disable the "hold open" or latch mode feature on the low current receiver. P2, or relay 2, on the radio receiver can be configaured to hold the gate open. In some cases it is desired to disable this ...

    • How to Erase All Programming From the Low Current Receiver

      Overview In this article you will learn how to erase all programming from the low current receiver. This will remove all keypads and remotes that are programmed to the receiver. Doing this may be necessary when trying to solve issues where the gate ...

    • How to Pair a Basic Wireless Keypad to the Receiver

      Overview In this article you will learn how to pair a basic wireless keypad to the radio receiver. The radio receiver is located inside the opener's cabinet. The keypad's code will be entered on the keypad at the same time as a button on the radio ...

    • How to Unpair a Basic Wireless Keypad to the Receiver

      Overview In this article you will learn how to unpair a basic wireless keypad from the radio receiver. The radio receiver is located inside the opener's cabinet. The code will be entered on the keypad at the same time as a button on the radio ...

    • How to Unpair a Premium Metal Wireless Keypad from the Receiver

      Overview In this article you will learn how to unpair a premium wireless keypad from the radio receiver. The radio receiver is located inside the opener's cabinet. The code will be entered on the keypad at the same time as a button on the radio ...