How to Add a Temporary Access Code to a Premium Metal Wireless Keypad
Overview
In this
article you will learn how to add a temporary access code to a premium
wireless keypad. A temporary access code is a code that can be used up
to 9 times before it is automatically deleted. This is useful if someone
requires access to the gate a limited number of times. The premium
wireless keypad is capable of holding up to 256 different temporary
access codes. A temporary access code can be up to 5 digits long. If the
desired temporary access code is less than 5 digits, it must end with a
"#" sign. The "#" is a part of the temporary access code. An example of
this process will be provided at the end of the article.
Procedure
Enter the Master Password Then Press 9
The
default master password is "11111". The keypad will give 2 short beeps
if this step is done correctly. If you get a long beep at this step,
your master password may be incorrect.
To reset the master password back to the default, refer to this article: How to Reset the Master Password Back to Default on a Basic Wireless Keypad
Enter the Desired Temporary Access Code and Then Press 9
If the desired temporary access code is less than 5 digits, it must end with a "#" sign.
Example codes: "24680" "4321#" "25#".
Re-enter the Desired Temporary Access Code and Then Press #
Enter the Number of Activations (1-9) and Then 1 (channel #)
The
temporary code can be programmed to work 1 to 9 times before it gets
deleted, select the desired amount of activations followed by the
channel number (typically 1).
The keypad will gives 2 short beeps indicating the temporary code has been added successfully.
If
you'd like to test the new temporary code, type the code in and confirm
the keypad rapidly beeps. Keep in mind this will use one of the
activations.
Example:
The
temporary access code in this example will be "3544#", it will be given
5 activations, the master password is the default, and the code will be
added to channel 1.
- Enter the master password then press 9
- 11111
- 9
- 2 short beeps
- Enter the desired temporary access code then press 9
- 3544#
- 9
- Enter the desired temporary access code then press #
- 3544#
- # (again)
- Enter the amount of activations and then the channel number.
- 5
- 1
- 2 short beeps
Related Articles
How to Add an Access Code to a Premium Metal Wireless Keypad
Overview In this article you will learn how to add an access code to a premium metal wireless keypad. An access code is used to operate the gate. The premium metal wireless keypad is capable of holding up to 256 different access codes. An access code ...How to Remove an Access Code from a Premium Metal Wireless Keypad
Overview In this article you will learn how to remove an individual access code from a premium wireless keypad. This is done if the keypad has multiple access codes programmed but only a single code needs to be removed. An example of this process ...How to Add an Access Code to a Basic Wireless Keypad
Overview In this article you will learn how to add an access code to a basic wireless keypad. An access code is used to operate the gate. The basic wireless keypad is capable of holding up to 24 different access codes. An access code can be up to 5 ...How to Hold the Gate Open Using a Premium Metal Wireless Keypad
Overview The latch open feature should ONLY be used with systems utilizing the automatic close timer to close the gate. In this article you will learn how to hold the gate open using an access code on a Premium Metal Wireless Keypad. This process ...How to Remove all Access Codes from a Premium Metal Wireless Keypad
Overview In this article you will learn how to remove all access codes from a premium wireless keypad. This is done if the keypad needs to be completely wiped before adding new codes back in. An example of this process will be provided at the end of ...